top of page
Search
ria9akr

What's New in MOTOTRBO CPS 2.0? A Guide to the Latest Features and Bug Fixes



Introduction




MOTOTRBO CPS 2.0 is a radio programming software for dealers and service technicians that configure the MOTOTRBO radios. CPS stands for Customer Programming Software, which enables users to access and program (read, write, or clone) the codeplug of the MOTOTRBO subscriber and repeater in the available systems.


CPS 2.0 also allows the user to update or recover the codeplug and firmware of the radio as well as a centralized management of programming radios in-the-field. The firmware is the software that runs on the radio itself, which determines its features and functions.




mototrbo cps 2.0 download



Updating to the latest firmware is a must, as it contains some important bug fixes and keeps your radio up to date. The latest firmware also contains new features, extended programming options, and occasionally, fixes to bugs.


CPS 2.0 is now the recommended customer programming software for Motorola MOTOTRBO two way radios. It is a completely redesigned software that offers a more user-friendly interface, enhanced performance, and more capabilities than the previous version.


In this article, we will guide you through the process of downloading, installing, licensing, and using CPS 2.0. We will also show you some of the features and benefits of CPS 2.0, as well as some of the compatible radios and firmware versions.


Downloading CPS 2.0




The first step to use CPS 2.0 is to download it from the official Motorola website or from an authorized dealer or reseller. You will need a valid account and login credentials to access the download page.


The software is available for different regions, such as UK & Europe, USA & Canada, Australia & New Zealand, etc. You need to make sure that you download the correct version for your region and your radios.


The current version of CPS 2.0 for UK & Europe is R2.26.203.0, which was released on April 2021. The current version of CPS 2.0 for USA & Canada is R02.26.x, which was released on May 2021. You can check the version number by looking at the file name or by opening the software and clicking on Help -> About.


Once you have downloaded the software, you will need to unzip it and run the setup file to install it on your computer.


mototrbo cps 2.0 installation guide


mototrbo cps 2.0 license registration


mototrbo cps 2.0 analog mode support


mototrbo cps 2.0 codeplug and firmware update


mototrbo cps 2.0 flashzap driver


mototrbo cps 2.0 radio driver


mototrbo cps 2.0 free download link


mototrbo cps 2.0 programming software tutorial


mototrbo cps 2.0 partner hub access


mototrbo cps 2.0 video library


mototrbo cps 2.0 latest version


mototrbo cps 2.0 compatible radios


mototrbo cps 2.0 repeater configuration


mototrbo cps 2.0 new features and enhancements


mototrbo cps 2.0 bug fixes and improvements


mototrbo cps 2.0 system requirements


mototrbo cps 2.0 user manual pdf


mototrbo cps 2.0 software subscription


mototrbo cps 2.0 entitlement id (eid)


mototrbo cps 2.0 activation code


mototrbo cps 2.0 offline mode


mototrbo cps 2.0 online mode


mototrbo cps 2.0 read, write, clone codeplug


mototrbo cps 2.0 backup and restore codeplug


mototrbo cps 2.0 import and export codeplug


mototrbo cps 2.0 channel settings and options


mototrbo cps 2.0 zone and scan list management


mototrbo cps 2.0 contacts and group list management


mototrbo cps 2.0 text message templates and quick texts


mototrbo cps 2.0 privacy and encryption settings


mototrbo cps 2.0 emergency and lone worker settings


mototrbo cps 2.0 bluetooth and wifi settings


mototrbo cps 2.0 gps and location settings


mototrbo cps 2.0 voice announcement and audio settings


mototrbo cps 2.0 battery and power settings


mototrbo cps 2.0 accessory and button settings


mototrbo cps 2.0 menu and display settings


mototrbo cps 2.0 network and ip settings


mototrbo cps 2.0 trunking and capacity plus settings


mototrbo cps 2.0 connect plus and capacity max settings


mototrbo cps 2.0 direct mode operation (dmo) settings


mototrbo cps 2.0 over the air programming (otap) settings


mototrbo cps 2.0 over the air rekeying (otar) settings


mototrbo cps 2.0 remote monitor and radio disable settings


mototrbo cps 2.0 radio management software integration


Installing CPS 2.0




To install CPS 2.0 on your computer, you need to follow these steps:


  • Double-click on the setup file that you downloaded.



  • Click Next on the welcome screen.



  • Read and accept the license agreement and click Next.



  • Select a destination folder for the installation and click Next.



  • Select a start menu folder for the shortcuts and click Next.



  • Click Install to begin the installation process.



  • Wait for the installation to complete and click Finish.



The installation process will also install two drivers: MOTOTRBO Flashzap Driver 1.5 and MOTOTRBO Radio Driver 7 Licensing CPS 2.0




After installing CPS 2.0, you will need to register and activate the application features. This requires an internet connection and a valid entitlement ID (EID) that you can obtain from Motorola or an authorized dealer or reseller.


The EID is a 25-digit alphanumeric code that enables certain features of CPS 2.0, such as analog mode support, Wi-Fi programming, over-the-air programming, etc. You can purchase different EIDs depending on your needs and preferences.


To register and activate CPS 2.0, you need to follow these steps:


  • On the menu bar, select Licenses -> Register Application Licenses...



  • In the Register Application Licenses window, enter the EID and click Query.



  • Select the feature to be registered and click Register.



  • Wait for the registration process to complete and click OK.



  • To view the registered application licenses, select Licenses -> View Application Licenses...



You can also check the status of your licenses by clicking on Help -> License Status. This will show you the expiration date, activation count, and remaining activations of your licenses.


Using CPS 2.0




Once you have installed and licensed CPS 2.0, you can start using it to program and configure your MOTOTRBO radios. You will need a compatible USB cable or Bluetooth adapter to connect your radio to your computer.


To use CPS 2.0, you need to follow these steps:


  • Connect your radio to your computer and turn it on.



  • Open CPS 2.0 and select Device -> Read Device.



  • Wait for the software to read the codeplug of your radio. The codeplug is the configuration file that contains all the settings and parameters of your radio.



  • Make any changes or adjustments to the codeplug as needed. You can use the navigation pane on the left to access different sections of the codeplug, such as General Settings, Channels, Zones, Contacts, etc.



  • Select Device -> Write Device to save the changes to your radio.



You can also use CPS 2.0 to clone or update the codeplug and firmware of your radio. Cloning means copying the codeplug from one radio to another radio of the same model and firmware version. Updating means downloading and installing the latest firmware version for your radio from Motorola's website.


To clone or update your radio, you need to follow these steps:


  • Connect your source radio (the one with the codeplug or firmware that you want to copy) to your computer and turn it on.



  • Open CPS 2.0 and select Device -> Read Device.



  • Select Device -> Clone Device or Device -> Update Firmware depending on what you want to do.



  • Follow the instructions on the screen and connect your target radio (the one that you want to copy to) when prompted.



  • Wait for the cloning or updating process to complete and disconnect your radios.



Features of CPS 2.0




CPS 2.0 is a major improvement over the previous version of CPS in terms of design, performance, and functionality. Some of the features and benefits of CPS 2.0 are:


  • A more user-friendly interface that allows you to customize the layout, color scheme, font size, and toolbar icons according to your preferences.



  • A faster performance that reduces the time required to read, write, clone, or update your radios.



  • A more comprehensive codeplug editor that gives you more options and flexibility to configure your radios.



  • A more reliable firmware updater that checks for compatibility and prevents errors or failures during the updating process.



  • A more secure license manager that protects your licenses from unauthorized use or duplication.



  • A more versatile device manager that supports multiple devices and connections, such as USB, Bluetooth, Wi-Fi, over-the-air, etc.



Compatibility of CPS 2.0




CPS 2.0 is compatible with most of the MOTOTRBO radios and firmware versions that are currently available in the market. However, there are some exceptions and limitations that you need to be aware of before using CPS 2.0.


CPS 2.0 Compatible Radios





Radio ModelFirmware Version


CP200dR01.20.02.0000



You may need to restart your computer after the installation is complete. You can then launch CPS 2.0 from the start menu or the desktop shortcut.


Conclusion




MOTOTRBO CPS 2.0 is a powerful and versatile software that allows you to program and configure your MOTOTRBO radios with ease and efficiency. It offers a more user-friendly interface, faster performance, more comprehensive codeplug editor, more reliable firmware updater, more secure license manager, and more versatile device manager than the previous version of CPS.


With CPS 2.0, you can access and program the codeplug of your radios, clone or update the codeplug and firmware of your radios, and manage the programming of multiple devices and connections. You can also customize the layout, color scheme, font size, and toolbar icons of CPS 2.0 according to your preferences.


CPS 2.0 is compatible with most of the MOTOTRBO radios and firmware versions that are currently available in the market. However, you need to make sure that you download the correct version of CPS 2.0 for your region and your radios, and that you update your radios to the latest firmware version before using CPS 2.0.


If you want to learn more about MOTOTRBO CPS 2.0 or purchase the software or the licenses, you can visit the official Motorola website or contact an authorized dealer or reseller. You can also watch some videos or read some blogs that demonstrate various functions of CPS 2.0.


We hope that this article has given you some useful information and tips on how to download, install, license, and use MOTOTRBO CPS 2.0. If you have any questions or feedback, please feel free to leave a comment below.


FAQs




What are the system requirements for CPS 2.0?




The minimum system requirements for CPS 2.0 are:


  • Operating system: Windows 7 SP1 or later (32-bit or 64-bit)



  • Processor: Intel Core i3 or equivalent



  • Memory: 4 GB RAM



  • Hard disk space: 5 GB free



  • Display: 1024 x 768 resolution or higher



  • Internet connection: Required for downloading, installing, licensing, and updating CPS 2.0



  • USB port: Required for connecting the radio to the computer



  • Bluetooth adapter: Optional for connecting the radio to the computer wirelessly



How do I check for updates for CPS 2.0?




To check for updates for CPS 2.0, you need to follow these steps:


  • Open CPS 2.0 and select Help -> Check for Updates...



  • The software will connect to the Motorola server and check for any available updates.



  • If there are any updates, you will see a list of them and their descriptions.



  • Select the updates that you want to download and install and click Next.



  • Follow the instructions on the screen to complete the update process.



How do I backup and restore my codeplug using CPS 2.0?




To backup and restore your codeplug using CPS 2.0, you need to follow these steps:


  • Connect your radio to your computer and turn it on.



  • Open CPS 2.0 and select Device -> Read Device.



  • Select File -> Save As... and choose a location and a name for your codeplug file.



  • To restore your codeplug, select File -> Open... and browse to your codeplug file.



  • Select Device -> Write Device to write the codeplug to your radio.



How do I use Wi-Fi programming with CPS 2.0?




To use Wi-Fi programming with CPS 2.0, you need to have a Wi-Fi enabled radio and a Wi-Fi EID license for CPS 2.0. You also need to have a Wi-Fi network that supports multicast traffic and has internet access.


To use Wi-Fi programming with CPS 2.0, you need to follow these steps:


  • Configure your radio's Wi-Fi settings using CPS 2.0 or the radio menu.



  • Connect your radio to the Wi-Fi network and make sure it has internet access.



  • Select Device -> Connect via Wi-Fi...



  • <li Select your radio from the list of available devices and click Connect.



  • Use CPS 2.0 as usual to read, write, clone, or update your radio over Wi-Fi.



How do I use over-the-air programming with CPS 2.0?




To use over-the-air programming with CPS 2.0, you need to have a radio that supports OTAP (Over-The-Air Programming) and an OTAP EID license for CPS 2.0. You also need to have a repeater that supports OTAP and is connected to the same network as your computer.


To use over-the-air programming with CPS 2.0, you need to follow these steps:


  • Configure your radio's OTAP settings using CPS 2.0 or the radio menu.



  • Select Device -> Connect via OTAP...



  • Select your repeater from the list of available devices and click Connect.



  • Select your radio from the list of available devices and click Connect.



  • Use CPS 2.0 as usual to read, write, clone, or update your radio over-the-air.




44f88ac181


0 views0 comments

Recent Posts

See All

Comments


bottom of page